Troubleshooting Procedure Dks
The steps to solve a symptom are listed sequentially. You might not need to perform every step before the symptom is solved. Start with the first step, and then test for the symptom. If the symptom persists, replace any modules you removed, go to the next step, and test again. Continue down the list until the symptom is solved.
- Reseat battery to verify battery is seated correctly with battery lock engaged.
- Try known-good charged battery.
- Turn off the computer. Reset the power manager by pressing the reset button (located above and right of the Audio/Video port). Wait five seconds before continuing. Press the power button to start the computer.
Note: Make sure the reset button is not caught under the button opening.
Warning: Resetting the power manager will permanently remove a RAM disk, if present, and all of its contents. You will also need to reset the date and time (using the Date & Time control panel).
4. Replace logic board.
Document Information
Product Area: iBook (Dual USB)
Category: iBook Hardware
Sub Category: Troubleshooting
Keywords: kibook kssts
Contributor:
Process Owner:
Support Site Index | Export Compliance
Contact Us | Privacy Notice Copyright © 2001 Apple Computer, Inc. All rights reserved. 1-800-MY-APPLE
|
QuickTime j| Support | |||||||
|
Protection "Ian Downloads Sped ¡cations Knowledge Base Discussions Support Irdcx | |||||||
Post a comment