Apple Self Repair Guides

To install the fuser unit

• RepairSurge Auto Repair Software
• Weight Loss Plan That Is Sure To Work
• Human Anatomy Study Course

1. Set the fuser unit down on the guides and align the inner sides.
2. Make sure the fuser is seated correctly. There should be no space between the fuser unit screws and the printer frame.

CAUTION: If the fuser unit is not perfectly seated inside of the guides, paper jam problems can occur.

1. Tighten the two captive screws on the fuser unit. Check to be sure the unit is secure.
2. Plug the three connectors from the fuser unit wires into the connectors under the fan. See Figure 4-21.
3. Install the transfer charger.
4. Install the transport chute/detack saw assembly.
5. Close the top cover.
6. Plug in the printer.