Drive Chassis

Before you begin, remove the following:

  • Top housing
  • Power supply
Rom Audio Cable

Disconnect these cables:

  • Floppy drive cable
  • SCSI power cable
  • SCSI data cable

CD-ROM Drive

CD-ROM. Audio Cable

CD-ROM Drive

CD-ROM. Audio Cable

Power Rom Audio
SCSI Data Cable

If a CD-ROM drive is installed, disconnect these cables:

  • SCSI power cable
  • SCSI data cable
  • CD-ROM audio cable

SCSI Power Cable

Remove the two drive chassis screws.

Power Rom Audio

Lift the front of the drive chassis until the chassis is perpendicular to the bottom case.

Note: The chassis swivels where the chassis tabs meet the bottom housing.

Chassis _

(Perpendicular for Removal)

Chassis Tab _.

Chassis (Installed)

5 Guide the chassis tabs out of the slots in the bottom housing and remove the chassis.

Replacement Note: Carefully seat the bottom corners of the drive chassis into the Drive Chassis guides in the bottom housing.

Floppy Drive
0 0

Post a comment

  • Receive news updates via email from this site